Rat Amylase ELISA Kit Instructions

Shanghai Xitang Biotechnology Co., Ltd. 021-55229872, 65333639
Rat Amylase ELISA Kit
  ( for use in serum, plasma, cell culture supernatants, and urine biological fluids )
principle
This experiment used double antibody sandwich ABC-ELISA. The anti-rat Amylase monoclonal antibody was coated on the microtiter plate, Amylase in the standard and sample was combined with the monoclonal antibody, and biotinylated anti-rat Amylase was added to form an immune complex attached to the plate, horseradish peroxidation. The enzyme-labeled Streptavidin is combined with biotin, and the substrate working solution is blue. Finally, the stop solution sulfuric acid is added, and the OD value is measured at 450 nm. The Amylase concentration is directly proportional to the OD value, and the standard curve can be used to obtain Amylase in the sample. concentration.
Kit composition ( 2-8 ° C preservation)
Coated Wells
96 holes
Enzyme Conjugate
12ml
10× specimen dilution (Sample Buffer)
12ml
20×Wash Buffer
50ml
Standards: 2000mU / bottle
2 bottles
Substrate working fluid (TMB Solution)
12ml
Primary antibody working solution (Biotinylated Antibody)
12ml
Stop Solution
12ml
Prepare reagents and collect blood samples
1. Collection of specimens: serum, plasma (EDTA, citrate, heparin anticoagulation), cell culture supernatant, tissue homogenate, urine, etc., as soon as possible, stored at 2-8 ° C for 48 hours; longer time must be frozen ( -20 °C or -70 °C) Save to avoid repeated freezing and thawing. Serum and plasma were diluted 1 : 2 (take 50 ul, add 50 ul of standard dilution, dilute 2 times).
2. Standard product preparation: Add 1ml of distilled water before use and mix well to form 2000mU/ml solution. Set the standard tube 8 tube, the first tube plus the standard dilution 900ul, the second to the eighth tube to add the sample dilution 500ul. Add 100 ul of the standard solution of 2000 mU/ml to the first tube, mix and aspirate 500 ul with the sampler, and transfer to the second tube. Repeat the dilution as described above, and remove 500 ul from the seventh tube and discard it. The eighth tube is a blank control.
3. The 10× specimen dilution was diluted 1:10 with distilled water (example: 1 ml concentrated dilution + 9 ml distilled water).
4. Washing solution: diluted 1:20 with distilled water (example: 1 ml concentrated washing solution added to 19 ml of distilled water)
Test procedure
1. Loading: Add 100 ul of standard or sample to be tested in each well. Mix the reaction plate thoroughly and let it stand at 37 °C for 120 minutes.
2. Wash the plate: Wash the plate thoroughly with washing solution 4-6 times, and dry it on the filter paper.
3. Add 100 ul of the first antibody working solution to each well. The reaction plate was thoroughly mixed and placed at 37 ° C for 60 minutes.
4. Wash the board: the same as before.
5. Add 100 ul of enzyme-labeled antibody working solution per well. The reaction plate was placed at 37 ° C for 30 minutes.
6. Wash the board: same as before.
7. Add 100 ul of substrate working solution per well, set 37 The reaction was carried out in the dark at °C for 15 minutes.
8. Add 100 ul of stop solution to each well and mix.
9. Measure the absorbance at 450 nm using a microplate reader within 30 minutes.
Result calculation and judgment
1. All OD values ​​should be subtracted from the blank value before calculation.
2. Take standard products 200, 100, 50, 25, 12.5, 6.25, 3.12, 0 mU/ml as the abscissa and OD as the ordinate. Draw on the coordinate paper and draw the standard curve.
3. Find the corresponding Amylase content on the graph based on the OD value of the sample, and multiply by the dilution factor.
Kit performance
1. Sensitivity: The minimum Amylase detection concentration is less than 1.5mU/ml.
2. Specificity: Recombinant or natural rat Amylase can be detected simultaneously. Does not cross-react with other cytokines in rats.
3. Repeatability: The coefficient of variation in the plate and plate is less than 10.6%.
Precautions
1. It is recommended to make double holes for the above standard holes and samples to be tested. The standard curve should be made at the same time for each measurement.
2. The washing process is critical. Insufficient washing will result in an accuracy error and an erroneous rise in the OD value.
3. After the slats are opened, the remaining slats should be sealed again to keep the slats dry .
4. This kit should be stored in a 4 o C refrigerator.
4. This kit is for scientific research only and cannot be used for clinical diagnosis!
Shanghai Xitang Biotechnology Co., Ltd. 021-55229872, 65333639
,

LED High Bay Lights


Lighting up a large indoor space has never been easier and more efficient than with our line of LED high bay lights. They're perfect for indoor spaces with high ceilings (15-50ft), like warehouses, factories, supermarkets, gyms, retail stores, and many others. These high-bay lights are available in linear, UFO, and U-bracket flood light styles with options including prismatic reflectors and suspension kits. Our entire line of LED high bay lights provide excellent efficacy and output to illuminate your space while lasting 3 times longer than HID fixtures.

All of these high-quality lighting options have been manufactured from durable materials, such as all steel housings coated with a high gloss baked enamel and rust-resistant protective coating for extra protection, and are available in a variety of mounting options including surface, pendant, stem, chain, or hanging mount, depending on fixture model. Many options are available with an additional wire guard for further protection. We offer many options that are UL listed for performance you can trust, as well as lengthy manufacturer warranties on most models.

At  our goal is to be able to turn orders quickly from order date to your door for installation on the job. Our industry lighting knowledge and service makes your choice easy when looking for quality fluorescent high output lighting fixtures.  contact us by phone, email, or live chat.


LED HIGH/LOW BAY LIGHT

LED HIGH BAY LIGHT,UFO HIGH BAY LIGHT,warehouse lighting,WORKSHOPP LIGHT,INDUSTRIAL LOW BAY LIGHT

Guangzhou Zhongzhinan Supply Chain Co.,Ltd. , https://www.gzzhongzhinan.com

Posted on