What should I check for the use of the brush roller?

When people use the brush roller, sometimes they will find such problems or problems, so they have doubts about the quality of the product. In fact, as long as the manufacturer and the manufacturer pay attention to the following points, the brush can be well eliminated. There is a possibility of problems with the roll product.

1. First of all, the brush roller must be cleaned and packaged before leaving the factory. Because there will be a lot of shredded hair in the process of planting hair and flat hair, it is necessary to comb the brush before packing and clean the broken hair. clean.

2. In the transportation process from the manufacturer to the manufacturer, in order to prevent the contamination of the brush wire by debris and dust, it is necessary to use packaging materials such as packaging boxes and packaging bags to prevent the occurrence of damage to the brush roller.

3, before reaching the use of the manufacturer must be careful not to expose the brush directly (without any packaging), placed on the ground or other polluted environment.

4. Put a cushion on the shaft head of the brush roller to keep the brush wire upright and clean.

Brush-type aluminum plate cleaning machine is a pre-treatment equipment for de-oiling and polishing deep-processing of various metal plates such as aluminum plate, steel plate, copper plate, copper clad plate, steel strip and aluminum strip; it is a variety of sign factory and metal plate deep processing manufacturer. Ideal for cleaning, degreasing and polishing equipment, the following is a brief introduction to the brush-type aluminum plate cleaning machine.

Brush type aluminum plate washing machine features:

1. It adopts horizontal transmission structure for easy operation.

2. The cleaning working section adopts imported abrasive wire brush, and the brush is ground by high-speed rotation of the brush, and the brush is axially oscillated to ensure the quality of cleaning and polishing.

3, the brush up and down can be adjusted to ensure the accuracy of brushing.

4, the use of high-pressure spray cleaning method, does not damage the surface, especially suitable for the cleaning of very thin high-precision tape, in addition to this unit is also suitable for cleaning nickel strip and other rare metal strip cleaning.