Pure white gold needle mushroom bag cultivation

First, the process of cutting bag → mix → → bagging → sterilization → inoculation → germination → Lei Lei → mushroom two, production technology 1. The cut bag cuts plastic tube bags used for cultivating mushrooms into small pieces of 30 to 35 centimeters in length. One end is tied with a string to make them into bags. Each ton of material required bags of 12 to 13 kg. 2. Mixing raw materials formula: cottonseed hull 40 ~ 42.5 kg, bran 7.5 ~ 10 kg, 0.5 kg of gypsum, lime 0.5 kg, water 65 ~ 67.5 kg. Mix the raw materials and piling it into a 70-75 cm high stockpile. Pack it for 24 hours. 3. The bagging and loading of material shall be carried out by hand pressing the material around the bag. When the material is loaded to a height of 17 to 18 centimeters, the empty bag portion is folded into a bundle along the top plane of the material, and is pressed down forcefully to squeeze out the air in the bag. Finally, the bag mouth is tied into a slip knot with a plastic rope. Such a bag can contain about 0.4 kg of dry material and about 1 kg of wet material. The filled bags were sterilized at 100°C for 14 hours. 4. Vaccination selection of white and dense Flammulina species reserve. The strain bottle and bag ratio is better than 1:25. Place the sterilized bag in the contaminated box. Before adding the bacteria bottle to the contaminated box, wipe the bottle with a 3% concentration of lysyl solution or a 0.2% potassium permanganate solution. The outer wall; before the inoculation, use alcohol cotton balls with a concentration of 70% to wipe off the bottle mouth. The strains are then inserted into the bags in proportion. When inoculating the bacteria, the surface of the bag should be scattered as much as possible. Finally placed in an aerosol box closed fumigation 20 minutes sterilization. After each bottle of bacteria is picked up, the tools used to take the seeds must be sterilized one time to avoid cross-infection. 5. Temperature and humidity control mushroom shed should be ventilated before use. For each cubic meter of area in front of the sterilizing bag, 10 ml of formaldehyde and 8 g of potassium permanganate were used to smoke the shed for 24 hours, and then ventilation was opened. After the bacterium bags are arranged, it is necessary to keep the sheds dry and ventilated. During the germination stage, the temperature of the shed is controlled at 20-25°C, and ventilation is often performed; when the shed temperature is lower than 16°C, the night can be closed. The humidity is generally controlled at about 65%. The temperature during the budding stage is controlled at 13-20°C, the humidity is increased to about 85%, and micro ventilation is provided to give scattered light. The temperature of the fruiting stage is controlled at 6 to 8°C, the humidity is maintained at 80% to 85%, and it is not ventilated, resulting in a dark environment. 6. Prevention of insect pests should pay attention to pest control, in addition to the ventilation window, but also continue to spray 90% dichlorvos 1000 times around the ground in the shed.

Plasma Sterilizer
Plasma sterilizer is to sterilize by hydrogen peroxide low-temperature plasma.Through sterilization,a certain method is used to inactivate various microorganisms on medical instruments and surgical instruments,thereby achieving the purpose of sterilization.
1,Medical plasma sterilizer: sterilization temperature of 50°C± 5°C,low temperature and no humidity,no damage to the sterilization articles and equipment,can extend the life of precision instruments.
2.Medical plasma sterilizer green and environmental protection:hydrogen peroxide solution is used as sterilizing agent,no toxic substance remains,no drainage or exhaust is required,no damage to the operator's body,and special filters for high efficiency can be applied to the air intake and exhaust ports.Absorption of H2O2 from the process of vacuum rejection will result in zero pollution to the environment.
3.Medical plasma sterilizer sterilization stability:The sterilization chamber is made of aluminum or stainless steel,which has advantages of anti-corrosion and thermal conductivity,which makes the temperature of the sterilization chamber more balanced and effective, and ensures that H2O2 maintains 100% of the gas throughout the process.The hydrogen peroxide low temperature storage system ensures that the hydrogen peroxide concentration is stable and effective and does not volatilize.
4.High sterilizing efficiency:The design of a rectangular sterilization chamber makes it possible to load more instruments at a time and make the use of the sterilization chamber more convenient.
SanQiang  medical companies specializing production plasma sterilizer.

Plasma Sterilizer

Plasma Sterilizer,Low Temperature Plasma Sterilizer,Automatic Plasma Sterilizer,Medical Intelligent Sterilizer

Henan Sanqiang Medical Equipment Liability Co.,Ltd , http://www.sterilizers-china.com

Posted on