1. Don't abruptly change the throttle during transportation. Slowly increase or decrease the throttle as required by the workload.
2. During the transportation operation, the throttle and gear position must be properly controlled according to different conditions such as the road, load, and locomotive technical status. When working at full load, the road surface is flat and the field of vision is good. When the traffic flow is not large, a high-grade throttle is used. The load is light, the road surface is uneven, and the high-speed small throttle is used when the traffic flow is not large; the locomotive is ramped up at full load. Midway shifting; when the locomotive is ramped down with full load, low-speed and small throttle are used. However, the downhill gradient should not be allowed to turn on and off, nor is it allowed to coast. According to the situation, the brakes can be used intermittently, and attention must not be given to “brake deadâ€.
3, parking time and space operation time should not be long, limited to 15 minutes.
4, when the locomotive starts, no load, with a small throttle as well, there is load, with the throttle as well.
5. When the locomotive is on its way to the destination, reduce the throttle or the throttle slightly and use the locomotive to coast. Do not use a throttle instead of a horn.
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
The main features:
1)Ideal cold light effects
Using the new LED cold light source, ensure energy saving and environmental protection and long service life up to 80,000hours and more.
The temperature increase of surgeon`s head below 1℃. LED do not engender infrared ray and ultraviolet radiation, without the temperature
rise and tissue damage caused by halogen shadowless light, also it can accelerate the wound healing after surgery, and without Radiation pollution.
With color temperature constant and soft, LED is very close to the sunshine.
1) Excellent shadowless effect
Lamp with the most scientific radian and Multi point light source design, ensure better uniform illuminance. When the lamps are partially occluded,
also can achieve perfect shadowless effect.Lamp panel radius of gyration ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.
2) Excellent deep lighting
It is based on modularize method by Computer Aided Design, focused to irradiating with more beams of LED. It produces the deep lighting which beams
more than 1200cm,the illumination of center up to 180,000Lux or more, and offer the color temperature that can be adjusted from 3700K to 5000K which
is close to sunshine. Absolutely, it really reflects the color of human tissue and satisfied by all kinds of operating light needs.
3) Advanced control system
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
It offers illuminance memory function.
It does not effect using when a single circuit or one bulb is broken.
4) Universal suspension system
Rotating arm, a new type of alloy material is made of eight edge type.
Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°,
The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.The equipped with fatigue correcting unit and
fix position hand handle device, easy to fix position after long time use.
5) Modern laminar lamp
The thickest part of lamp-chimney is not more than 10cm.
The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment,
easily adjust, flexible fixed.
Single Dome Operating Light,Operation Theatre Lights,Single Head Operating Light,One Head Operating Lights
Shandong Kang'erjian Medical Technology Ltd. , https://www.operatingtable.nl