How to ferment sawdust to make nutritious soil Forestry production areas sawdust sawdust wood piles, put a lot of pressure on the environment, in fact sawdust is a good resource, the correct use can be doubled value. After sawdust fermentation can be used for a variety of purposes, both for high-quality nursery stock flowers and soil ingredients, but also for low animal crude protein feed and so on. Sawdust contains about 58.4% carbon, 0.26% nitrogen, 0.08% hydrogen, 2.6% ash content, and a high carbon-to-nitrogen ratio. It is an organic material that is difficult for conventional biological starters (natural fermentation is more difficult, usually takes a year or two). The use of Gumbol biological starter can greatly accelerate the fermentation process. But pay attention to the correct operation, especially the adjustment of carbon/nitrogen ratio is one of the key links. Sawdust fermentation must add appropriate amount of nitrogen source (nitrogen fertilizer or poultry manure), adjust the appropriate carbon-nitrogen ratio, in order to obtain a better fermentation effect. Operation method:
1, stock preparation. 2 m3 of sawdust, 1 bag of microbial fermentation agent, 2 kg of urea (or 50-100 kg of poultry excrement), and 5 kg of rice bran.
2, moisture. The water content of the sawdust must be determined before the amount of water can be determined. The water content of the sawdust to be fermented is adjusted to 60-65% (usually by hand, the fingers cannot fall off the water as a rough standard), and the water content is too high. Or too low are not conducive to fermentation. Then, 2 kilograms of urea were mixed with the appropriate amount of water to make a urea water reserve.
3, the material. Because it is too inconvenient to spread the material evenly, one bag of jinbao biofermenting agent should be evenly mixed in about 5 kilograms of rice bran, so that the mixture of the fermented microbial agent and rice bran can be increased to 6 kg. It is easy to spread it evenly into the pile of sawdust to be fermented. 4, spread the material. The above-prepared fermented microbial inoculant and rice bran mixture are evenly mixed in the sawdust, then, the prepared urea water is sprinkled on the sawdust after being planted, and the sawdust is piled into a pile, and the rear lid is piled up. Upper breathable cover can be.
5. Turn over. After the sawdust is piled up for 7-10 days, the fermentation temperature reaches about 60°C. It can be turned once at a high temperature of about 60°C for 24-36 hours, and then waits until the temperature reaches 60°C. The second time it turns, the second time After turning, naturally leave it for 5-7 days. The fermentation temperature is stable below 40°C to complete the fermentation. Fermentation can be completed 25-30 days under normal conditions (post cooked can be extended to 30-45 days). Details can visit the website or consult.
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
Main Feature:
1.ZF series of reflective shadowless lamp is widely used in various occasions operation lighting needs,is the ideal lighting equipment of modern operation room.
2.Full close streamline lamp body design completely meets the demand of the sterilization and high standard of laminar flow purification in operation room.
3.Adopting more than 5280 slices of reflection mirror, guaranteeing 1200 mm lighting depth.
4.Special design of color temperature compensation provides closer to that of natural sunlight and helps the doctor to distribute operation parts clearly and accurately.
5.The back-up bulb will start work within 0.2 seconds automatically in case the main bulb is damaged,ensuring the continuation of surgical operation. There`s failure indication in the handle control panel,to recommend the bulb to be changed after operation.
6.Detachable handle jacket ,can be used for high temperature (≤134℃)sterilized.
7.Digital-control circuit offers many functions, with 10 segment brightness selection stepless lighting regulation,brightness memory, low voltage start-up and power on self test etc.
8.The life-span of OSRAM halogen bulb is up to 1500 hours; the bulbs can be changed easily.
9.Germany ORSAM lamp socket,thermostability
10.Balance arm can be optional Germany imported or domestic.
11.Mould Die-casting Eight edge type Revolving arm
Overall Reflex LED Operating Light
Overall Reflex LED Operating Light,LED Surgical Lights,Overall Reflex LED Operating Light,Reflection Operating LED Light
Shandong Kang'erjian Medical Technology Ltd. , https://www.operatingtable.nl