Rocking Granulator Installation Instructions 1. This machine is packed in the whole box. After unpacking, move it to the appropriate place of use and use it after leveling.
2. The electrical circuit device is not restricted by the direction of rotation, and the line is connected to the switch via the belt cover under the base, and the cable card is clamped.
Swing type particle machine instructions 1. Usage: Start the machine, pour the mixture into the bucket, and use the rocking action of the rotating drum to squeeze the material through the screen to form particles. If the crushing block is to be added gradually, it should not be filled up to avoid overpressure. Make the screen vulnerable. 2. Matters needing attention: If the powder does not stop in the powder bucket, it can not be used to shovel, so as not to cause injury, use bamboo shovel or stop work.
Swing type particle machine maintenance instructions 1. Regularly inspect the machine parts once a month to check whether the worm gear, worm, bearing and other active parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be placed in a dry and clean room, and the atmosphere must not contain acids and other places where corrosive gases flow to the parts.
3. After the machine is used once or when it is stopped, the rotating drum should be taken out to clean or brush the remaining powder in the bucket, and then it is ready to be prepared for the next use.
4. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and the cloth is covered with a cloth.
2. The electrical circuit device is not restricted by the direction of rotation, and the line is connected to the switch via the belt cover under the base, and the cable card is clamped.
Swing type particle machine instructions 1. Usage: Start the machine, pour the mixture into the bucket, and use the rocking action of the rotating drum to squeeze the material through the screen to form particles. If the crushing block is to be added gradually, it should not be filled up to avoid overpressure. Make the screen vulnerable. 2. Matters needing attention: If the powder does not stop in the powder bucket, it can not be used to shovel, so as not to cause injury, use bamboo shovel or stop work.
Swing type particle machine maintenance instructions 1. Regularly inspect the machine parts once a month to check whether the worm gear, worm, bearing and other active parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be placed in a dry and clean room, and the atmosphere must not contain acids and other places where corrosive gases flow to the parts.
3. After the machine is used once or when it is stopped, the rotating drum should be taken out to clean or brush the remaining powder in the bucket, and then it is ready to be prepared for the next use.
4. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and the cloth is covered with a cloth.
Feeding Tube In Stomach,Gastric Feeding Tube,Gastric Lavage Tube,Stomach Wash Tube
K-MED Co., Ltd. , https://www.kmedasia.com