Electronic tensile testing machine fixture slip solution

1. Specification of the operating procedures of the testing machine
For the short clamping length of the specimen and the improper selection of the clamp of the clamp, in the operating procedure of the electronic tensile testing machine, it must be specified: "The clamping length of the tensile specimen shall not be less than the length of the tooth surface of the clamp" and "No" Use a jaw for a large section to hold a small section specimen or a flat jaw to hold a large specimen. The operator must test according to the operating procedures.
2. Repair the wedge bevel
Plastic deformation and severe eversion of the wedge block, so that the wedge block slope collapse or wear should be repaired in time, the repair can generally take the following method
A, repair welding
The trapped or worn parts of the wedge block are first repaired and then restored by the inserting machine (should be scraped if the machining does not meet the roughness requirements). The hardness and strength of the repaired parts are generally improved, and it is ok to use the jig correctly later.
B, mosaic
The wedge-shaped block slope is removed by inserting the bed by 10 mm according to the original design angle, and then a polished hardened steel plate is placed in this part, which weakens the design strength of the clamp body, but the long-term use effect is better.
C. A layer protection device is added above the wedge block
In order to prevent the metal oxide sample from falling into the wedge-shaped slope during the stretching process, two rubber blocks can be placed on the wedge shape, so that the iron oxide skin can be effectively reduced to fall into the inclined surface, and the wedge-shaped bevel can be coated with butter. Or grease, and scrub and change the oil regularly.

Foot Spa Machine With Heat

A Foot Spa Machine with heat is a device used to provide a relaxing and therapeutic foot massage. It usually has a basin filled with warm water and has various massage settings such as vibration, bubbles, and rollers. The heat function helps soothe tired and aching feet, while the massage setting provides a deep-tissue massage that helps improve circulation, reduce tension, and relieve pain. Some foot spas also come with removable attachments, such as pumice stones and brushes, for extra exfoliation and cleansing. Overall, a foot spa machine with heat is a great tool for anyone looking to pamper their feet and promote overall relaxation and wellness.

Foot Spa Machine With Heat,Bubble Foot Bath Massager,Foot Massage Machine,Pedicure Foot Spa Machine

Huaian Mimir Electric Appliance Co., LTD , https://www.mimirfootbath.com

Posted on