The production of biogas is affected by many factors, but the biogas fermentation agent is not only simple, but also effectively solves many problems, such as the Gum Biogas fermentation agent. Jinbao Biogas Fermentation Aid contains the nutrients and trace elements required for the growth and reproduction of methanogens. The use of trace elements in them effectively stimulates methanogens and promotes their rapid propagation. At the same time, they increase the activity of enzymes and speed up the reaction of enzymes, accelerating cellulose. The process of degradation and decomposition of macromolecular compounds; the use of nutrients necessary for the propagation of the bacteria added in the product to better grow the bacteria species; the use of a mixture of adsorbents to increase the contact area between the bacteria and the raw materials, and the use of adsorption The heat raises the temperature for methanogens and increases the heat, so that the biogas digesters can produce gas quickly.
The dosage is calculated by adding 200-250 grams of Gum Biogas fermentation aid per cubic meter of digester. The basic amount of fermentation tanks with a volume of 4 cubic meters, 6 cubic meters, 8 cubic meters, and 10 cubic meters is roughly 2 bags, 3 bags, 4 bags and 5 bags. Note that when the new pool is in use, mix the raw materials and Gambo Biogas Fermentation Aid uniformly into the pool; when the old pool is in use, remove the biogas slurry from the discharge port to flush the Gum Biogas fermentation aid from the feed inlet into the pool. Repeat several times to try to mix evenly. The new pool can reduce the start-up time by more than half, and the old pool can greatly increase the gas production and gas production rate.
Under normal circumstances, the material in the tank can quickly produce gas by adding the fermentation auxiliaries. If there is no increase or little change in the production gas within one week after adding the fermentation auxiliaries, you can first check whether the mixture of the fermentation auxiliaries is even and can be repeatedly injected into the material inlet. Into the biogas slurry, to ensure that evenly mixed into the pool of materials; Second, check for leaks, and take appropriate measures to plug. Details can visit the website or consult.
Pain Relief Patch For Breast
[Name] Medical Cold Patch
[Package Dimension] 10 round pieces
The Pain Relief Patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
The patches give fast acting pain relief for breast hyperplasia, breast fibroids, mastitis, breast agglomera tion, swollen pain.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch For Breast
Pain Relief Patch For Breast,Pain Relief Plaster For Breast,Relief For Breast Pain,Pad Relief Patch For Breast
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xjplaster.com