1. The installation of the main and auxiliary machines should be reliable and reliable. The length and tightness of the drive belt should be suitable. The rotating and transmission parts should be equipped with protective cover devices.
2. Before starting the machine, check whether the technical status of each part of the rice mill is good, and then close the inlet board and open the outlet board.
3. After the rice mill is operating normally, the inlet hopper is filled with rice and the outlet flap is opened gradually. Observe that the accuracy of the rice, broken rice, and broken corn meet the requirements. If not, stop the outlet plate or rice knife spacing.
4, in the accuracy, broken rice, broken valley to meet the requirements of the situation, try to open a large import flap, until full load.
5. Regularly clean up the export of rice machine and keep the export open.
6. If rice grains and whole rice are found mixed in the rice bowl, check whether the rice sieve is broken or not, and take corresponding measures.
7. During the work, the tightening condition of the belt and the screw and the bearing temperature and lubrication should be checked frequently. If the sound of the running sound of the rice machine is found to be abnormal, the machine should be shut down immediately for inspection. No forced operation is allowed.
8, always pay attention to rice clean. Rice can not be sandwiched with iron, nails, bricks and other hard objects, in the hopper should be installed within the barbed wire.
In this category, you will find test tube and stand in many various sizes and variations. For laboratory work, Test tubes and Test tube racks is an essential element of all labs. Test tube racks allow the test tube to be securely held upright so that nothing can run out while filling the tubes.
Measuring cup is another one of the basic consumable container in lab. Except Test tube racks, Yingmed also supply other lab device holder like Stand base, Lab Jack, Pipette Stand and Laboratary Clamp in this category. If you can not find the one you need, please contact our customer services for more details.
Test Tube And Stand,Test Tube Rack,Test Tube Holder,Test Tube Stand
NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com