In order to ensure the normal operation of the tractor and prolong its service life, the tractor should do a series of preparations before use. The following are the precautions before using the new tractor for reference:
1, listed on the household
After the new tractor was bought back. The documents such as purchase invoices, certificates of conformity, and user manuals shall be carried within 3 months, and the formalities of the household shall be handled by the agricultural machinery, levy and other departments. - It is an illegal act to drive without a license and it is punished.
2. Tighten each part of the connector
Although the tractor is factory-tested, it is difficult for the machine to loosen the connection during repeated transportation. For this purpose, various fasteners and fasteners should be tightened in time, especially the steering system, brake system, suspension, and wheels.
3, check the liquid surface height
Mainly fuel tank oil level, water tank surface, transmission and rear axle lubricant oil level, and battery electrolyte level. When it is found that the liquid level is insufficient, the liquid material should be added in time.
4, several oil inspection matters:
(I) The amount of oil in the oil sump should not be less than the underline of the oil ruler. (2) The quality of oil: If the tractor is shipped out of the factory in summer, and bought back in winter, it should be replaced with oil used in winter; vice versa. (3) The switch of the oil filter on a large tractor should be switched to the "summer" or "winter" position depending on the season or the temperature. (4) In order to prevent the oil in the oil-bath type air filter oil pan from splashing out and contaminating the vehicle capacity during the transportation process, some manufacturers add it at the end of the factory and pay attention to adding the oil after buying it.
5, run-in
It is to make the rotation speed of the new machine from low to high, the load from small to large, through the gradual operation process, the grinding marks on the friction surface of gears, shafts and other more polished. Running-in has an important effect on prolonging the service life of the parts. Do not neglect the running-in process and neglect the running-in process. Otherwise, the machine will be damaged due to minor loss.
Antimalarial:
Antimalarial medications, also known as antimalarials, are designed to prevent or cure malaria. Such drugs may be used for some or all of the following:
Treatment of malaria in individuals with suspected or confirmed infection
Prevention of infection in individuals visiting a malaria-endemic region who have no immunity (Malaria prophylaxis)
Routine intermittent treatment of certain groups in endemic regions (Intermittent preventive therapy)
Some antimalarial agents, particularly chloroquine and hydroxychloroquine, are also used in the treatment of rheumatoid arthritis and lupus-associated arthritis.
Current practice in treating cases of malaria is based on the concept of combination therapy, since this offers several advantages, including reduced risk of treatment failure, reduced risk of developing resistance, enhanced convenience, and reduced side-effects. Prompt parasitological confirmation by microscopy, or alternatively by rapid diagnostic tests, is recommended in all patients suspected of malaria before treatment is started. Treatment solely on the basis of clinical suspicion should only be considered when a parasitological diagnosis is not accessible.
Antiparasitic:
Antiparasitics are a class of medications which are indicated for the treatment of parasitic diseases, such as those caused by helminths,amoeba, ectoparasites, parasitic fungi, and protozoa, among others. Antiparasitics target the parasitic agents of the infections by destroying them or inhibiting their growth;[4] they are usually effective against a limited number of parasites within a particular class. Antiparasitics are one of the antimicrobial drugs which include antibiotics that target bacteria, and antifungals that target fungi. They may be administered orally, intravenously or topically.
Broad-spectrum antiparasitics, analogous to broad-spectrum antibiotics for bacteria, are Antiparasitic Drugs with efficacy in treating a wide range of parasitic infections caused by parasites from different classes.
Antimalarial Drugs,Artemether Lumefantrine,Antiparasitic Drugs,Mebendazole Tablets
NOUVASANT PHARMhealth LTD. , https://www.nouvasant.com