Installing and using our energy-saving stoves is simple and efficient. Unlike traditional models, our design allows for easy conversion from the original stove without major modifications. With just a few steps, you can upgrade your cooking appliance in under ten minutes. Here’s how to do it:
Step 1: Remove the existing cooking water tray and stove head. Also, take out the two nozzles on the air switch of the electronic control panel. You’ll notice a small flame hole aligned with the switch, while the left or right side has a larger one.
Step 2: Use a wrench or pliers to gently tap the iron vent pipe underneath the stove. This helps loosen any coal dust or rust that might be stuck inside. Then, blow or flush out the debris to ensure the small holes where the new nozzle will go remain clear. This step is crucial to avoid blockages that could affect performance.
Step 3: Replace the single-tube energy-saving stove by installing the nozzle with screws. Make sure to wrap the threads with a raw material tape (available at plumbing stores) to prevent gas leaks. Tighten the connection properly. If you're using a dual-tube model, simply install the nozzle according to the size of the stove and the fire eye. Be careful not to apply too much force—this could break the screw.
Step 4: Once installed, adjust the height of the stove based on the type of cookware you use. For pots or round pans, the ideal height is about 1.5 to 3 cm above the bottom of the pot. This ensures even heat distribution and better efficiency.
Step 5: Check for gas leaks. Hold a lighter near the connections while opening the main valve of the liquefied gas cylinder slowly. If you see a blue flame, it’s safe. If there’s a smell, immediately close the gas valve, open windows, and check for the source of the leak. Never use any open flames during this process.
Step 6: After everything is set up, test the stove. When lit, the surface should glow red within 3 to 5 seconds. If it takes longer or doesn’t turn red at all, the gas pressure may need to be increased slightly. This adjustment helps achieve the best energy-saving performance.
By following these simple steps, you can easily upgrade to a more efficient and eco-friendly cooking system. Our design focuses on user-friendliness and safety, making the transition smooth and hassle-free. Enjoy improved performance and lower fuel consumption today!
We are a professional Chinese supplier of Liver Health Material; we supply various products of Liver Care Ingredients,Anti-Alcohol Ingredients and Hangover Material ; and we can providing product images and basic parameters with each Liver Protect Material, such as Liver Protect Material, Hangover Material, Milk Thistle Extract, Dihydromyricetin 98%, Cordycepin 98%, etc. Look forward to your cooperation!
Liver Protect Material,Hangover Material,Milk Thistle Extract,Dihydromyricetin 98%,Cordycepin 98%
Xi'an Quanao Biotech Co., Ltd. , https://www.quanaobio.com