Moisture is an important factor affecting the activity of functional micro-organisms and affecting the speed of fermentation. If water is adjusted properly, it will greatly accelerate the fermentation process of the materials, facilitate the production of organic fertilizers, and make people feel the joy brought by high-tech. If the moisture is not adjusted properly, it will cause troubles for the fermentation. Operators will often complain that the fermentation auxiliaries will not work. This will not only waste products but also waste money.
The proper moisture content is conducive to the flow of functional microorganisms and nutrients in the stockpile, and the ventilation conditions in the stockpile can be adjusted. For crop stalk materials, the appropriate moisture content allows the material to swell and soften in order to facilitate microbial decomposition. However, high water content will also affect the air permeability of the material pile, which can easily cause anaerobic conditions (anaerobic conditions have a great killing power for aerobic microorganisms), inhibit the activity of functional microorganisms, and produce odors. In the case of making feeds using GIGABYTE anaerobic feed starters, the moisture is too high to raise the temperature. Since it cannot be warmed, is it still called fermentation? The aerobic grocer-type fertilizer fermentation aid and anaerobic gold As an example, the baby's type II feed fermentation auxiliaries have a suitable moisture content of 50 to 65% of the wet weight of the raw material. What is the concept of this? Imagery, if the material is “halted†in half, It is understood that a half is pure dry material and the other half is water. We often use the following simplest and most direct experience in judging: that is, grabbing a handful of material by hand. It is advisable to see the water without dripping. If you do not see the water, it is too dry. If the dripping water is in line, it is too wet. How to adjust the moisture? When we use Fermentation Agro-fermentation auxiliaries to produce organic fertilizers, livestock manure materials such as chicken manure with a moisture content of less than 40% can be used to make feces with relatively high water content. After being mixed for 5-10 hours, the fermentation auxiliaries are added. If the crop straws are stacked for a long time, they should be chopped or shredded and the water sprayed should be piled. Generally, the fermentation auxiliaries are added after 24 hours. For materials with moisture content higher than 70%, sawdust, rice bran, dry earth and other materials can be added to regulate moisture. For materials with water content exceeding 80%, solid-liquid separation and other methods should be used to reduce the moisture content. . However, the situation is different when using Jinbao II feed fermentation auxiliaries to make feed, because the requirements of the feed are relatively higher than the requirements of the fertilizer, so when the moisture is adjusted, the added material is required to be clean, no mildew, and the particles should be small It is best to crush, must follow the instructions, can not take it for granted, to avoid undue economic losses, should pay attention. Of course, there are many ways to adjust the moisture. The general principle is to adjust to local conditions. It is necessary to save time and save costs, and do not adversely affect the original materials or fermentation products.
[Composition]
The main component of this preparation is human immunoglobulin, which is prepared by cold ethanol fractionation of human plasma from healthy donors. The manufacturing process contains a step to remove anticomplementary activity and a dual viral inactivation process. It contains a suitable amount of glucose or maltose as stabilizer (see table below), but does not contain any antiseptic or antibiotic. The distribution of IgG subclasses is close to the serum level of normal subjects and maintains the bioactivity of Fc fragment of IgG.
[Indications]
1. Primary
agammaglobulinemia, such as X-linked hypogammaglobulinemia,
common variant immunodeficiency diseases, immunoglobulin G subclass deficiency,
etc.
2. Secondary
immunoglobulin deficiency diseases, such as severe infection, septicemia of
newborn, etc
Intravenous Injection Of Human Immunoglobulin
Intravenous Injection Of Human Immunoglobulin,Intravenous Immunoglobulin,High-Quality Effective Intravenous Immunoglobulin,Human Immunoglobulin For Intravenous Injection
Sichuan Yuanda Shuyang Pharmaceutical Co., Ltd. , https://www.syimmunoglobulin.com