(1) The metal casing of electric agricultural equipment must be equipped with a reliable grounding system or a temporary grounding device to prevent electric shocks and ensure user safety. Proper grounding is essential to protect both the operator and the machinery from electrical hazards.
(2) Before moving any electric-powered agricultural tool, always switch off the power supply first. Never move the equipment while it is still connected to the power source, as this can lead to serious accidents or damage to the machine.
(3) Power cables for electric farm machines should be installed according to standard electrical codes. If the equipment is located far from the main power source, it is recommended to install a double-pole switch and a capacitor circuit breaker near the machine. This allows for quick disconnection in case of emergencies, improving overall safety.
(4) When performing maintenance on faulty electric farm machinery, always disconnect the power supply before starting work. Never attempt repairs while the equipment is still live. Place warning signs such as "Do Not Close" or "Work in Progress" near the switch, and consider assigning a guard to prevent accidental re-activation of the power.
(5) Agricultural machines that use single-phase motors must have a low-voltage leakage protection device installed. This device should remain sensitive and functional at all times, so that in the event of an electrical fault, the power will automatically cut off, reducing the risk of electric shock and saving lives.
(6) Before using agricultural machinery that has been idle for a long time or has been exposed to moisture, perform a thorough inspection and test run. If the machine does not start properly after being powered on, immediately turn it off to avoid overheating, potential fire hazards, and risks to personal safety.
(7) Operators of agricultural machinery must maintain a strong sense of safety awareness and strictly follow operating procedures. It is important to wear insulated footwear when working with electrical equipment, avoid cleaning electrical parts with wet hands or damp cloths, and never hang clothes on power lines to prevent short circuits or accidents.
(8) In the event of an electrical fire, quickly cut off the power supply. Do not use water to extinguish the fire, as it may conduct electricity and cause further danger. If someone is electrocuted, immediately turn off the power and provide assistance. If the power source is far away, use non-conductive materials like wooden sticks to move the wire away from the victim. Never pull the person by hand, as this could result in you also receiving an electric shock.
(Word count: 504)Silicone Cleanser Brush,Cleansing Silicone Brush,Best Silicone Cleansing Brush,Silicone Facial Cleansing Brush
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizon.com