Transplanter maintenance tips

Recently, Yiquan County Biquan Township Agricultural Service Center has more than two pairs of agricultural cadres and taught transplanter maintenance tips. He said that rice transplanter maintenance skills can be summarized as "a change, two wash, three check, four tune, five maintenance." One change. It is the replacement of engine, plug box, gear, drive, planting arm, gearbox oil and gear oil. According to the requirements specified in the operating instructions of the rice transplanter, the engine oil should be replaced after one quarter or 50 hours of operation; the transplanter should be replaced after two quarters or 100 hours of operation; the gear oil box should be replaced after three working quarters or 150 hours. Second wash. After each shift, the dirt on the rice transplanter should be cleaned. At the same time, the carburetor, sedimentation cup, and air filter of the engine should be cleaned. Three investigations. Is to check the engine, transplanter work mechanism, walking and operating mechanism. The main contents of the inspection engine are: amount of fuel, amount of oil, and the condition of the fastening parts of each connection; the main contents of the inspection plugging machine working mechanism are: wear of the feeding mechanism, crank, pendulum bar, pawl, fork, etc. , deformation, lubrication and gap size; Check the main content of walking and operating mechanism: clutch, drive wheel, steering clutch working conditions, the amount of oil in the gear box, V-belt tightness, drive sprocket box oil, each A kind of control cable and so on. Four tune. It is the adjustment of the engine, the transplanting work mechanism, the traveling mechanism and the operating mechanism. The main contents of engine adjustment are: adjustment of spark plug clearance, adjustment of carburetor idle speed; adjustment of the working mechanism of rice transplanter: main contents of plant spacing, number of plants, depth of transplanting, gaps between picking and planting fork, etc.; adjustment of walking and operating mechanism The main content is: The adjustment of the pull wire includes the insertion and retraction of the clutch handle pull wire, the safety pull wire, the hydraulic lift handle pull wire, the steering clutch pull wire and other gaps and the sensitivity adjustment. If the gap is too large or insensitive, adjust the adjustment nut. At the same time, drip a few drops of oil in these wire holes to reduce the friction of the wire and increase the sensitivity. Five maintenance. When the rice transplanter is working for more than 100 hours, it is necessary to perform regular maintenance on the rice transplanter; the storage idle period maintenance is also called the post-season maintenance. The rice transplanter is often idle for a few months or even more than half a year after the end of a working season. Therefore, it is important to maintain the post-season maintenance and extend the service life of the rice transplanter.

Posted on